|
|
| |||||||||||
W. Tombling Ltd. |
You are here:- home > heater index > radiant heating index Radiant infra-red heater indexWall mounted ceramic radiant heatersWall mounted ceramic radiant heaters are designed for heating small areas within commercial and industrial buildings such as shops, veterinary surgeries, studios, security offices, etc. Wall mounted radiant heaters heat people and objects but not the surrounding air. Making them ideal for small to medium sized rooms and buildings with poor insulation, open doors etc. where warm air heating would be uneconomic. Activair wall mounted radiant heaters are fitted with ceramic infrared emitters which unlike halogen tubes don't produce an uncomfortable glare making them suitable for low ceilings. Quartz halogen infra red heatersWall mounted quartz halogen infra red heaters produce short wave infra-red rays and are frequently installed in buildings that are too difficult or expensive to heat using conventional warm air systems. They are particularly suited to large buildings that have high ceilings, are poorly insulated, or very drafty, such as workshops, warehouses, loading bays, churches, animal houses, factories, aircraft hangars, gymnasiums etc. They can also be used outdoors under waterproof covers in street cafes, beer gardens, golf driving ranges etc. 110V Portable radiant heatersA heavy duty 3Kw 110V portable radiant heater, designed for use in commercial and industrial buildings such as garages, factories, warehouses, warehouses, etc. Its long wave infrared output is perfect for drying paint and plaster, as well as keeping workers warm. 230V Portable radiant heatersA heavy duty 3Kw 230V portable radiant heater, designed for use in commercial and industrial buildings such as garages, factories, warehouses, warehouses, etc. Its long wave infrared output is perfect for drying paint and plaster, as well as keeping workers warm. 230V and 110V Tripod mounted portable infrared heatersTripod mounted 1500w quartz portable infrared heaters. Height adjustable tripod and tilt adjustable heater head. Ideal for use on building sites for heating workers or drying paint and plaster. Or in workshops to dry adhesives and grp. 230V models are fitted with a standard 13A UK plug. The 110V model has a yellow 16A 3 pin BS EN60309 plug. Overhead radiant heatersActivair electric overhead infra-red radiant heaters are designed for total or supplementary heating, and are suitable for use in a wide range of commercial buildings. They can be attached directly to the ceiling, or suspended from steel wires, chains or threaded rods. They are easy to install, safe, and maintenance free. In buildings with high ceilings or that are used on an irregular basis they can reduce heating costs by up to 25% compared to convector heaters.
Mobile infra-red radiant heaterThe BTQ3 mobile infra-red heater is lightweight and easy to manoeuvre with built-in wheels and a large carrying handle. Designed for 230V operation it is supplied with a 3 metre power cable and standard 13A UK plug. Twin 1400w short wave infra-red tubes provide instant heat at the flick of a switch, wherever it is required.
230V infrared outdoor heatersThe HLW1500 weatherproof outdoor infrared heater is designed to withstand rain and direct water jets. It is intended for use outdoors either mounted on a wall, suspended overhead, or fixed under a parasol or awnings, but it can also be used indoors where water is present. The quartz tungsten infrared lamp has been developed to deliver instant infrared heat with minimal glare, so users feel immediate warmth accompanied by a comfortable orange glow. Outdoor radiant infra-red heatersWeatherproof infra-red radiant heaters for use outside or inside in damp or wet area's, such as glasshouses. Corrosion resistant construction with heavy duty stainless steel elements which will never shatter and are unaffected by vibration or water spray. Available in 500, 1000, 1500, 2000w outputs for 230V operation. For wall mounting or suspension from steel wire or chains. The benefits of infra red heatingElectric ceramic infra red heating does not produce fumes, odours or water. It has no moving parts and unlike gas infra red heating doesn't require regular servicing to maintain its efficiency. It is easily controlled using manual switches, timeswitches or passive infra red detectors (PIR), and is quick and cost effective to install.Electrical radiant heating for industrial premisesElectrical radiant heating is gaining popularity for heating industrial premises because it has many advantages over traditional warm air heating, not least that it can reduce heating costs considerablyYou are here:- home > heater index > radiant heating index
If you found this page useful, please take a moment Copyright © 2004/6, W. Tombling Ltd. |