Commercial fan heaters

Designed for use in harsh environments Activair Ace commercial fan heaters are ideal for space heating, frost protection and condensation control in factories, warehouses, workshops, and glasshouses.

Activair electric fan heaters represent over 40 years of continuous research, development and operating experience. Available in 10, and 20kW, three phase 415V supplies. Activair electric fan heaters are designed for fixed installation and should only be installed by a qualified electrician, to the relevant IEEE and any other local wiring regulations.

Advantages of Activair ACE electric fan heaters

• Low capital, installation and running costs.

• Ease of control - Activair electrical fan heaters can be controlled by electromechanical contactors, for simple on-off control, or electronic switching systems for fine control. The fan can be operated independently of the elements to provide cooling or continuous air recirculation. Activair heaters are compatible with most types of thermostat, humidistat and building environment control.

• Flexibility - Activair electrical fan heaters can be used free blowing or with metal, flexible or Activair polythene ducting for improved air distribution.

• Versatility - floor standing, suspended, duct or wall mounted without modification.

• Safety - no naked flames, gas bottles etc.

• Efficiency - high volume fans provide rapid and even heat distribution.

• Clean dry air - Activair electrical fan heaters do not produce fumes or water vapour.

Features of Activair ACE electrical fan heaters

• Sealed, maintenance free fan motor with built in thermal overload.

• Quiet high efficiency fan.

• Proven robust spiral heating elements.

• Integral auto reset overheat safety cutout.

• Safety finger guards on both air inlet and outlet.

• Steel casing coated in a durable scratch and corrosion free finish.

• Feet/mounting brackets included.

Calculating the size of fan heater

It is very important to use the right size of heater. For information on how to calculate the correct heater size see heatloss calculations, or use our quick calculator

Ace overhead commercial fan heater specification

Specification
Model		ACE 10	ACE 20
Element Rating	kW	10	20
Element Voltage	V	400
Element Phase		3+N
Element Phase Current	A	14	28
Motor Rating	W	250
Motor F.L.C	A	1.8
Motor Operating Temp.	C	-20 to 50
Air Volume   0 pa                    75 pa	M3/hr	4860 3492
Noise	dB	55
Temperature Lift   0 pa                             75 pa	C	6 8	12 16
Throw	M	15
Weight	Kg	25
Case colour		Pastel Beige (RAL7032)
IP Rating		44
Dimensions		Click here
Suspension Eye Internal Diameter	mm	14

Controlling Ace fan heaters

Activair ACE electrical fan heaters are designed for fixed installation, and require external over current protection and isolation. To simplify and speed up installation we manufacture control panels for use with Ace heaters,  see controls for details.

Electricity supply requirements for Ace fan heaters

Activair electric heaters are designed for 400V 3 phase electricity supplies, and are suitable for use in the UK, most of Europe, Eastern Europe and the Middle East, but not the USA.

For more information or a quotation

The Ace range of commercial fan heaters provide rapid, clean and reliable heating for small commercial premises such as industrial units.

For more information contact our sales department or for a quotation click the blue quote buttons above.