|
|
|
|
|
|
|
|
|
Fixed evaporative coolers | |
|
|
|
|
|
|
|
|
|
|
|
W. Tombling Ltd.
Wembley House
Dozens Bank
West Pinchbeck
Spalding
Lincolnshire
PE11 3ND
U.K.
|
|
You are here:- home
> cooling index
> evaporative cooling homepage
> fixed evaporative coolers
Fixed evaporative coolers
Internal overhead evaporative coolersEvaporative cooling systems provide cost
effective cooling for medium and large commercial and industrial
buildings. Mounted overhead, to free up valuable floor space the ECP-INT
internal evaporative cooler will cool areas of up to 200m2
(2150sq.ft.). The ECP-INT evaporative cooling system can be
installed very quickly with minimum disruption. Requiring only a mains
water supply and single phase 230V electricity it is designed to be
installed by your own electricians or fitters
|
|
|
External evaporative coolers
Industrial evaporative coolers are used to cool open plan buildings such as warehouses, factories and large retail units.
Mounted either on the roof or on outside walls they produce high volumes of filtered, cooled fresh air reducing the indoor
temperature and creating a comfortable environment.
The ECP-EXT is a powerful industrial evaporative cooler which will cool an area of up to 200 square meters
(2150 sq.ft.). It is much cheaper than equivalent air conditioners and costs up to 90% less to run, bringing cooling to buildings, which were
previously considered too expensive to cool.
|
|
|
Internal or external coolers?Two versions of ECP evaporative coolers are available, for either
internal ECP-INT or
external ECP-EXT installation. The type of
evaporative cooler installation is governed by cost, the building construction, and any local planning restrictions. |
|
You are here:- home
> cooling index
> evaporative cooling homepage
> fixed evaporative coolers
If you found this page useful, please take a moment
to tell a friend or colleague about it.
Copyright © 2004/6, W. Tombling Ltd.
|
|